Concrete Block making Machine
Hydraulic operated
Our machine is a stand type High Density Hand Operated Block Making versatile to shift to any working site to cast blocks on wooden or steel pallet.
It has a top pressing ram operated by the toggle mechanism, fitted with light weight vibrator. Bottom plate is vibrated with efficient light weight adjustable amplitude eccentric vibrator. With the mechanical advantage developed by the toggle with small manual force the knock of the vibrations are bolstered effectively to the blocks. This results concrete with less voids and higher strength or lesser cement for the same strength attained by any other hand operated machines. By pressing the Operating Lever, the mould leaves the blocks on the pallet. The blocks with the pallet is removed and kept for wet drying manually.
Good quality concrete blocks are achievable amplitude and very high frequency vibration, driven by a 1.5 H.P .(3 phase) electric motor. Any shape of interlocking Pavement Blocks can be produced with different colours.
Varient
SPECIFICATION | Single vibrator |
Power (Total) | 5HP (Three Phase Motor) |
Hydraulic pump : | 3 HP x1-1440 rpm |
Vibrator Mould | 1.5 HP 2800 rpm |
Ram : | – |
Propeltion | 0.5 HP – 1440 rpm |
OPERATION PRESSURE | 140 Kg /Cm2 |
VIBRAIONS | 6000 vpm Amp |
DRIVE | 25: 1 Worm reduction gear box and chain through front wheel |
Moulding Area | 860 x 600 mm |
Weight | 900Kg without mould (approx.) |
Dimensions | 2000 x 1500 x 2000 mm |
Capacity 200 x200 x400 mm (8inch) Blocks 150 x200 x400 mm (8inch) Blocks 100 x200 x400 mm (4inch) Blocks | 50 to 60 Strokes / hr 250 to 300 / hr 200 to 240 / hr 400 to 480 / hr |
SPECIFICATION | Double vibrator |
Power (Total) | 6.5 HP (Three Phase Motor) |
Hydraulic pump : | 3 HP x1-1440 rpm |
Vibrator Mould | 3 HP x1-2800 rpm |
Ram : | – |
Propeltion | 0.5 HP x 1-1440 rpm |
OPERATION PRESSURE | 140 Kg /Cm2 |
VIBRAIONS | 6000 vpm Amp |
DRIVE | do |
Moulding Area | 860 x 600 mm |
Weight | 900Kg without mould (approx.) |
Dimensions | 2000 x 1500 x 2000 mm |
Capacity 200 x200 x400 mm (8inch) Blocks 150 x200 x400 mm (8inch) Blocks 100 x200 x400 mm (4inch) Blocks | 50 to 60 Strokes / hr 250 to 300 / hr 200 to 240 / hr 400 to 480 / hr |
SPECIFICATION | Triple vibrator |
Power (Total) | 8HP (Three Phase Motor) |
Hydraulic pump : | 3 HP x1-1440 rpm |
Vibrator Mould | 3 HP x1-2800 rpm |
Ram : | 1.5 HP x 1- 2800 rpm |
Propeltion | 0.5 HP x 1-1440 rpm |
OPERATION PRESSURE | 140 Kg /Cm2 |
VIBRAIONS | 6000 vpm Amp |
DRIVE | do |
Moulding Area | 860 x 600 mm |
Weight | 900Kg without mould (approx.) |
Dimensions | 2000 x 1500 x 2000 mm |
Capacity 200 x200 x400 mm (8inch) Blocks 150 x200 x400 mm (8inch) Blocks 100 x200 x400 mm (4inch) Blocks | 50 to 60 Strokes / hr 250 to 300 / hr 200 to 240 / hr 400 to 480 / hr |
SPECIFICATION | Little block X |
Power (Total) | 12HP (Three Phase Motor) |
Hydraulic pump : | 5 HP x1-1440 rpm |
Vibrator Mould | 5 HP x1-2800 rpm |
Ram : | 1.5 HP x 2- 2800 rpm |
Propeltion | 0.5 HP x 1-1440 rpm |
OPERATION PRESSURE | 140 Kg /Cm2 |
VIBRAIONS | 6000 vpm Amp |
DRIVE | do |
Moulding Area | 860 x 600 mm |
Weight | 900Kg without mould (approx.) |
Dimensions | 2000 x 1500 x 2000 mm |
Capacity 200 x200 x400 mm (8inch) Blocks 150 x200 x400 mm (8inch) Blocks 100 x200 x400 mm (4inch) Blocks | 50 to 60 Strokes / hr 250 to 300 / hr 200 to 240 / hr 400 to 480 / hr |